Matrox Maevex 5150, User Manual

Page: 9 / 56

Matrox Maevex Series – User Guide 9
Optional hardware (sold separately)
Depending on your connection setup, you may also need any of the following hardware:
Maevex 6100 Encoder –
„ Matrox secure cable solution
Maevex 5150 Encoder –
„ Network cable (CAT 5, 5e, 6, or 7)
„ Shielded HDMI cable or certified high-speed HDMI cable (Encoder device to monitor)
„ VGA cable
„ Analog audio cable
Maevex 5150 Decoder –
„ Analog audio cable
„ DVI to HDMI adapter
Installation overview
To install your Matrox product:
1
Install your Maevex 6100 encoder – see “Installing and connecting your Maevex 6100
encoder”, page 12 .
2
Connect your product –
ƒ Maevex 6100 Encoder – see “Installing and connecting your Maevex 6100 encoder”,
page 12 .
ƒ Maevex 5150 Encoder – see “Connecting your Maevex 5150 encoder”, page 15 .
ƒ Maevex 5150 Decoder – see “Connecting your Maevex 5150 decoder”, page 18 .
3
Validate your setup – see “Validating your Maevex setup”, page 23 .
4
Install the software – see “Installing Matrox PowerStream Plus software”, page 27 . For
more information on PowerStream Plus software, see the Matrox PowerStream Plus User
Guide.