16
Matrox Maevex Series – User Guide
Description of supported connections
Connector
En
c
o
d
e
r
Dec
o
de
r
Description
Required
encoder
connection
5V DC power
9 9
Connect the 5V DC power supply included with
your product to this connector. While the 5V DC
power supply is connected to the device and
electrical socket, the power LED (
) is active
(not black).
For more information on LEDs,
5150 encoder and 5150 decoder”, page 24
.
HDMI
9
Connect a digital monitor to this connector. If
your digital monitor has a DVI connector, you
need an HDMI to DVI-D adapter to connect
your monitor to this connector.
Note:
To connect to this connector, you need a
shielded HDMI cable. If your video source uses
a display resolution higher than 720p60, we
recommend you use a certified high-speed
HDMI cable.
HDMI In
9
Connect your video source to this connector.
If your video source doesn’t support HDMI
output, use an HDMI adapter to connect it to
your encoder.
If your video source has a DVI connector, use
the DVI to HDMI adapter included with your
Maevex product to connect it to your encoder.
Note:
To connect to this connector, you need a
shielded HDMI cable. If your video source uses
a display resolution higher than 720p60, we
recommend you use a certified high-speed
HDMI cable.
HDMI Out
9
Optional
– Connect a digital monitor to this
connector. If your digital monitor has a DVI
connector, you need an HDMI to DVI-D adapter
to connect your monitor to this connector.
Note:
To connect to this connector, you need a
shielded HDMI cable. If the video output of your
device uses a display resolution higher than
720p60, we recommend using a certified
high-speed HDMI cable.
LAN1
9 9
Connect a network cable to this connector.
Note:
You can
only
use the second network
connector on the decoder to daisy chain the
5150 decoders.
LAN2
9
Line In
9
Optional
– Connect the analog audio output of
your video source to this connector. If you’re
using HDMI audio input, this connector is
disabled.
