Matrox Iris GT MIL, Installation And Technical Reference, Page: 24 / 256

24 Chapter 2: Powering and connecting to your Matrox Iris GT
Powering and connecting to your Matrox
Iris GT
The Matrox Iris GT has the following interfaces:
• Digital I/O and power connector. Used to receive power from an external power
source. The connector can also send/receive RS-232, trigger, strobe,
controlled-current output, and user-defined I/O signals to/from third-party I/O
devices.
• 100/1 GBase T connector . Provides connectivity between your Matrox Iris GT
and your computer or your network. Matrox Iris GT can gain access to a LAN
via Gbit Ethernet (GigE or 1000BaseT), fast Ethernet (100BaseT) or twisted pair
Ethernet (10BaseT).
• VGA/USB connector . Provides connectivity between your Matrox Iris GT and a
display device and/or USB device (such as a keyboard or a mouse).
If you have not purchased the Matrox Iris GT starter kit, refer to Matrox Iris GT
connectors section, in Appendix B: Technical Reference for the pinout of your Matrox
Iris GT’s connectors and for parts/cable purchasing information.