Matrox Iris GT MIL, Installation And Technical Reference, Page: 192 / 256

192 Appendix H: Matrox Iris GT utilities
RemoteAgent utility
The RemoteAgent utility publishes the list of MIL displays. This list also appears
as the
List of displays on the View utility page of the Matrox Iris portal website.
Note that the AUTOSTCE utility launches the RemoteAgent utility each time
your Matrox Iris GT powers up. If, however you use the DoEndRemoteAgent
utility to stop RemoteAgent, you must either reboot your Matrox Iris GT or
manually run the RemoteAgent utility.
Matrox Iris GT also publishes a default display for the View utility page, allowing
you to focus and position your Matrox Iris GT without needing to write a new
application (RemoteAgent.exe:FOCUS).
Syntax
Parameters
None.
Errors
• RemoteAgent failed to allocate an IRIS system object. Another MIL application
has allocated a Matrox Iris GT system. Wait until the system is released by the
MIL application before trying this operation again.
• RemoteAgent application already started . Only one instance of RemoteAgent
can run at a time.
• RemoteAgent error. Could not load MIL.DLL or MILIM.DLL . RemoteAgent is
dependent upon MIL DLLs to execute.
\>start RemoteAgent