Matrox DigiSuite LX MAX, User & Installation Manual

Page: 54 / 160

42
Chapter 5, Connecting Your External Devices
insulation between the cable’s center conductor and its shield. This
may degrade performance and/or reduce the cable’s reliability.
✃
Avoid twisting the cable or placing it in such a way as to create sharp,
right-angled bends.
✃
Never unplug a cable by pulling on the wire itself. Always unplug by
firmly grasping the plug body and pulling directly outward.
DigiSuite LX MAX input/output video connections
There are several video connection possibilities for DigiSuite LX MAX.
DigiConnect/Video breakout box
The DigiConnect/Video breakout box for use with DigiSuite LX MAX
(DDTV/DCT/AUD) provides you with the maximum flexibility possible
for connecting external devices to your computer.
Available DigiSuite LX MAX video cables:
✃
The analog video input/output cable (DLITE/VIDEO/CBL) supports
analog component, composite, and Y/C video.
✃
The digital cable for use with the optional digital module (DTV/DIG/
VID/CBL) supports one 10-bit 4:2:2 serial digital input as well as one
10-bit 4:2:2 serial digital main output and one 8-bit 4:2:2 serial digital
key output.
✃
The 1394 cable for use with the MAX card.
DigiSuite LX MAX DigiConnect/Video breakout box
Prepare for mounting
You have two choices for mounting your DigiConnect/Video breakout box,
either desktop or standard 19" rackmount.
°Important
Make sure you use the correct screws for each mounting
method. If you use the wrong ones, you can damage your equipment.
Compare the length of the supplied screws. Use the four
long screws only
with the desktop-mount pedestals.