Matrox DigiSuite LX MAX, User & Installation Manual

Page: 21 / 160

9
Uninstall DigiUtils
Uninstall DigiUtils
Before attempting to upgrade your existing DigiSuite LX system to
DigiSuite LX MAX, you must uninstall DigiUtils.
1 To carry out the installation and configuration procedures that follow,
you must log onto an account on your Windows system that has
Administrator privileges. For details, consult the appropriate
Microsoft documentation.
2 Choose
Start > Programs > Matrox DigiSuite Utilities > Uninstall
DigiUtils
.
3 The program will restart your computer for the changes to take effect.
Remove your existing DigiSuite hardware
Before you can install your DigiSuite LX MAX hardware, you must shut
down your computer and remove all existing DigiSuite hardware from
your system, including your DV-1394TI card and your DigiDesktop card
because neither of these cards is compatible with DigiSuite LX MAX. You
may keep your Adaptec DV-1394 card in your system during the
installation if you want to use it as a SCSI controller.
Install your Matrox G400, G450, or G550
If you’re not presently using a Matrox G400, G450, or G550 display card,
you must replace your system’s display card with one of these Matrox
display cards. Simply install the card as explained in its documentation.
Install the Matrox display driver from your DigiSuite CD
After installing Windows 2000, install the Matrox display driver provided
on your DigiSuite CD before running DigiUtils Setup.
¬
To install your display driver:
1 Insert the DigiSuite CD in your CD-ROM drive, or if your CD is
already inserted, double-click
My Computer , then double-click
Compact Disc .
2 From the DigiSuite CD menu, choose Install the driver for your
Matrox display card .