Matrox Convert DVI, Installation And User Manual

Page: 20 / 70

12
Chapter 2, Connecting External Devices to Matrox Convert DVI
Connecting Convert DVI for programming
stand-alone mode
To program your Convert DVI for stand-alone mode, it must be connected using
the USB cable to a computer that has the Convert DVI software installed.
Although you can also use the connections illustrated in
“Connecting Convert
DVI to a laptop/iMac/Mac Mini, or Mac Pro using one DVI monitor” on page 8 ,
and “Connecting Convert DVI to a Mac Pro using two DVI monitors” on
page 10 , the illustration below shows the minimum connection that’s required to
program your Convert DVI for stand-alone mode.
Primary DVI
monitor
To computer’s display
card (not required if
using a laptop or iMac
to program Convert
DVI).
Only the Convert DVI
cable’s USB connection
is required to program
Convert DVI for
stand-alone mode.
To AC wall
outlet
To computer’s
USB connector
Convert DVI