94 Appendix C: Operating system recovery
5. Insert a USB key into your USB drive. If using a backup file that you have
previously made and stored on a USB key, you will need to insert a second USB
key with that backup.
6. The Matrox Imaging ResQDisk utility will open. In the
Select OS image
area,
select to use the factory image or browse to the location where your required OS
backup
.wim
file is found and use that file. In the
Select USB storage device
location
area, select the USB drive that will be reformatted to a bootable USB
drive.
WARNING!
Note that this will reformat your USB key and all its data will be erased.
7. Select
Go
and the process of making a bootable USB drive will begin. When this
operation completes successfully, your rescue USB key can then be used to either
deploy a capture-for-deployment backup, restore an OS backup, or recover the
operating system of your Matrox 4Sight EV6 unit to factory settings, depending
on the
.wim
file that you used to make the bootable USB.
Restore Windows 10 IoT Enterprise
You can restore the Windows 10 IoT Enterprise operating system partition of your
Matrox 4Sight EV6 unit, using the Matrox 4Sight EV6 Rescue utility with an
OS backup
.wim
file or a capture-for-deployment backup
.wim
file.
Warning!
The restore operation will reformat and erase all data currently on the
Matrox 4Sight EV6 storage drive (SSD). If you have two (or more) partitions on
your Matrox 4Sight EV6 storage drive, or have external drives connected, select
the correct drive or disconnect from all external hard drives to prevent data being
erased by accident.
The RECOVERY partition houses the Matrox 4Sight EV6 Rescue utility and
does not get reformatted if you restore an OS backup
.wim
file from the Matrox
Rescue utility console. However, if you use a rescue USB key with a
capture-for-deployment backup
.wim
file (
W10EV6.wim
), or restore to factory
default settings file (
W10Ex64EV6.wim
), then both the RECOVERY and OS
partitions are reformatted.
Summary of Contents for 4Sight EV6
