Matrix SPARSH VP710, User Manual, Page: 461 / 1046

Matrix SPARSH VP710 User Guide 453
Intercom
Intercom allows establishing an audio conversation directly.The IP phone can answer intercom calls automatically.
You can tap the intercom key to automatically connect with a preconfigured target extension for outgoing intercom
calls, and the target extension will automatically answer incoming intercom calls by default.
You can also use intercom key to monitor the specific extension for status changes on the IP phone.
IP phone supports this feature using a SUBSCRIBE/NOTIFY mechanism as specified in RFC 3265. This feature
depends on support from a SIP server
For example:
An intercom key is configured on a supervisor’s phone to monitor the specific IP phone user status (busy or idle).
When the monitored user places a call, a busy indicator on the supervisor’s phone indicates that the user’s phone
is in use.
When the monitored user is idle, the supervisor can tap the intercom key to automatically connect with a pre
configured target extension for outgoing intercom calls.
When the monitored user receives an incoming call, the supervisor can tap the intercom key to pick up the call
directly.
Icon Indicator (configured as an intercom key)
.
Intercom is not available on all servers. Contact your system administrator for more information.
Outgoing Intercom Calls
Intercom is a useful feature in office environments to quickly connect with an operator or secretary. You can tap an
intercom key to automatically initiate an outgoing intercom call with a remote extension.
Icons Description
Intercom idle state
Intercom ringing state
Callout
Intercom callout state
Talking
Intercom talking state
Intercom failed state