Matrix SPARSH VP710, User Manual

Page: 341 / 1046

Matrix SPARSH VP710 User Guide 333
To place a call using the headset:
Do one of the following:
• With the optional headset connected, press to activate the headset mode.
Tap the line key to obtain a dial tone.
Enter the desired number using the keypad or the dial pad on the touch screen.
Press or tap Send .
• With the optional headset connected, press to activate the headset mode.
Enter the desired number using the keypad or the dial pad on the touch screen.
Press or tap Send .
To permanently use the headset mode, refer to “Headset Prior” .
The IP phone can handle multiple calls at a time. However, only one active call (the call that has audio
associated with it) can be in progress at any time. The IP phone can handle a maximum of 50 calls at one
time.
To place multiple calls:
You can have more than one call on your IP phone. To place a new call during an active call, do one of the
following:
• Tap the line key. The active call is placed on hold.
Enter the desired number using the keypad or the dial pad on the touch screen.
Press or tap Send .
• Press or tap the Hold soft key to place the original call on hold.
Tap the NewCall soft key.
Enter the desired number using the keypad or the dial pad on the touch screen.
Press or tap Send .
You can tap the desired call, and then tap the Resume soft key to retrieve it.
If multiple accounts are registered on the phone, you can first tap the desired line key on the idle screen or
tap the desired line from the status bar in dialing screen, and then you can use the selected account to
place a call.
Answering Calls
When you are not in another call, you can answer a call in three ways:
• Using the handset
• Using the speakerphone
• Using the headset