manualshive.com logo in svg

Matrix SPARSH VP710, User Manual, Page: 25 / 1046

Share
Download
Matrix SPARSH VP710 User Manual Download Page 25

Matrix SPARSH VP710 User Guide

17

•

If the device is left unused for a rather long time, disconnect it from the power supply and unplug the power 

plug.

•

When there is smoke emitted from the device, or some abnormal noise or smell, disconnect the device 

from the power supply, and unplug the power plug immediately. Contact the specified maintenance center 

for repair.

•

Do not insert any object into equipment slots that is not part of the product or auxiliary product.

•

Before connecting a cable, connect the grounding cable of the device first. Do not disconnect the 

grounding cable until you disconnect all other cables.

Cleaning Requirements

•

Before cleaning the device, stop using it and disconnect it from the power supply.

•

Use a piece of soft, dry and anti-static cloth to clean the device.

•

Keep the power plug clean and dry. Using a dirty or wet power plug may lead to electric shock or other 

perils.

Summary of Contents for SPARSH VP710























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments