Matrix SPARSH VP710, User Manual

Page: 144 / 1046

136 Matrix SPARSH VP710 User Guide
• Tap # or * in the pop-up dialog box, or tap Disabled to disable this feature.
• Tap to accept the change or to cancel.
Keypad Lock (Phone Lock)
Phone lock is used to lock the IP phone to prevent it from unauthorized use. Once the IP phone is locked, a user
must enter the password to unlock it.
All keys and screen are locked except the HEADSET key, Volume key, digit keys, # key, * key and Speakerphone
key. You are only allowed to dial emergency numbers, reject incoming calls by tapping the Reject soft key, answer
incoming calls by lifting the handset, pressing the Speakerphone key, the HEADSET key or tapping the Answer soft
key, and end the call by hanging up the handset, pressing the Speakerphone key or tapping the EndCall soft key.
The emergency number setting, if desired, must be made before lock activation.For more information, refer
“Emergency Number” .
The IP phone will not be locked immediately after the phone lock type is configured. One of the following steps is
also needed:
• Long press the pound key when the IP phone is idle.
• Press the keypad lock key (if configured) when the IP phone is idle.
In addition to the above steps, you can configure the IP phone to automatically lock the keypad after a period of
time.