Matrix SPARSH VP710 User Manual Download Page 121

Page: 121 / 1046

Matrix SPARSH VP710 User Guide

113

Syncing the Mobile Contacts to the IP Phone

If you disable the mobile contacts sync feature when you pair and connect the Bluetooth-Enabled mobile phone to
the IP phone (refer to

“Pairing and Connecting the Bluetooth-Enabled Mobile Phone”

), you need to enable the

mobile contacts sync feature manually when you want to sync the mobile contacts the IP phone.

To enable the mobile contacts sync feature manually:

•

Swipe down from the top of the screen or swipe left/right to go to the second idle screen.

•

Tap

Settings->Basic->Bluetooth.

•

Tap

after the desired Bluetooth-Enabled mobile phone name.

•

Tap the

radio box in the

Mobile Contacts Sync

field.

•

You need to authorize the IP phone to sync the contacts temporarily on the mobile phone. And then the

mobile contacts directory will appear in the IP phone directory list.

To view your mobile contacts on the IP phone:

•

Swipe down from the top of the screen or swipe left/right to go to the second idle screen.

Summary of Contents for SPARSH VP710























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SPARSH VP710

Reviews:

Matrix SPARSH VP710, User Manual, Page: 121 / 1046

Search results

Summary of Contents for SPARSH VP710

Reviews: