SEE HEALTH & SAFETY ON REVERSE
MATRIX TRAINING & SUPPORT
SOP7. TOILET BOWLS AND URINALS
STEP 1. PREPARE
Ensure protective clothing is worn as advised and your hands are
clean and dry. Carry out safety checks on the equipment as instructed in the user manual.
Place all warning/safety signs are correctly positioned around the area to be cleaned.
Wearing the disposable gloves, remove any large debris and place in the refuse sack.
STEP 2. SETTING UP
Set the machine ready for use as per the user manual supplied.
Fill/refill the water bottle to the correct level. Ensure the waste vacuum bucket is
empty. Open doors and windows in the area to allow the steam to ventilate.
STEP 3. LETS GET STARTED
Fit the detail nylon brush to the short steam
lance. Connect the short steam lance to the steam and vacuum hose, ensuring you lock the
clip in position. Fit the steam and vacuum hose into the front of the machine ensuring the
steam flap clips into place. Turn the steam control knob (if applicable) to your desired
setting. Press the red steam trigger under the handle to dispense the steam.
STEP 4. CLEANING
TOILET BOWL
Steam Clean and scrub surface of bowl, seat hinges, and seat. Remove
the short steam lance from the hose being careful as this will be hot!! Fit the floor
brush/squeegee insert into the floor brush nozzle; connect the floor brush nozzle to the
extension tube ensuring you lock the clip into position. Now using the steam and vacuum
together, clean over this area to generate a dry and sanitised surface, removing all residue
from the surface.
URINAL
As above but include cleaning all pipe work with detail nylon brush.
STEP 5. COMPLETION
Use the correct colour coded cloth or paper towel to wipe
away any splashes on the skirting boards. Steam clean all equipment that has been used
and tidy away, along with safety/warning signs. Dispose of gloves and refuse sack. Wash
and dry hands.
`
Washrooms
Steam Operating Procedures
SOP7
