Matrix SIMADO GFXD1111S, System Manual

Page: 94 / 194

88 Matrix SIMADO GFXD1111S V3 System Manual
Mobile-FXO Mode
When GFXD1111S is connected in Mobile-FXO mode, all three ports are functional. However, no call processing
happens at the FXS Port. It is used for programming the system only.
When GFXD1111S is set to Mobile-FXO Mode and there is an incoming call on Mobile or FXO Mode then the
system will route the incoming call as explained below:
Incoming Calls on Mobile Port:
When there is an incoming call on Mobile Port, GFXD1111S checks Mobile Port- Routing Type option first.
GFXD1111S supports following Mobile Port-Routing Type options:
1.
Connect and Dial
2.
Fixed
3.
Dial and Connect
Connect and Dial
• If Mobile Port-Routing Type programmed is 'Connect and Dial' then GFXD1111S will answer the call on the
Mobile Port and connect the speech path between FXO Port and Mobile Port by making FXO Port Off-
Hook.
• Caller will get tone of PSTN or PBX, to which the FXO Port is connected.
• Caller should dial the desired number and talk when the called party answers the call.
Fixed
• If Mobile Port-Routing Type programmed is 'Fixed' then GFXD1111S will not answer the incoming call on
the Mobile Port. It will check Mobile Port-Destination Number field.
• If number is programmed in Mobile Port-Destination Number field then GFXD1111S will dial out that
number on FXO Port and connect the speech path between FXO Port and Mobile Port.
• If no number is programmed in Mobile Port-Destination Number field then GFXD1111S will not dial any
number on FXO Port and will wait till the caller disconnects the call.
When Mobile Port- Routing Type programmed is 'Fixed' then:
•
GFXD1111S will not check Emergency Number Table even if the emergency number is programmed in
'Mobile Port-Destination Number' field.
• Allowed Denied Number logic will not apply.
• Automatic Number Translation (ANT) logic will not apply.
PSTN
GSM
Network
FXO
Port
GSM/
CDMA
FXS
Port
RJ-11
GFXD1111S
PBX
FSK/DTMF
Telephone
Instrument
T1
T2
T3
T4
S1
S2
Sn