Matrix SIMADO GFXD1111S, System Manual

Page: 25 / 194

Matrix SIMADO GFXD1111S V3 System Manual 19
CHAPTER 4
Features of SIMADO
GFXD1111S
Allowed-Denied Numbers
Allowed-Denied number feature provides you the flexibility to allow or deny dialing of a particular number or a set of
numbers. This feature is used to restrict the users from dialing the numbers that are programmed in the Denied
number list.
When you dial out a number on FXS port of GFXD1111S, it will compare the dialed number string with the numbers
programmed in allowed and denied number lists. One of the following situations may arise:
• If the dialed number matches with the allowed list number then GFXD1111S will dial out that number.
• If the dialed number matches with the denied list number then GFXD1111S will not process the call further
and will give an error tone to the caller.
• If dialed number does not match any of the numbers programmed in allowed and denied number list then
GFXD1111S will dial out that number.
• If same number is programmed in both allowed and denied number list then GFXD1111S will dial out that
number.
How to program?
Before you start programming allowed-denied number list, list down the numbers that you want to allow and deny
on a piece of paper first. You must enter SE mode to program the allowed and denied number list. You can program
maximum 32 numbers in both allowed and denied number list. Each entry can be of maximum 16 characters.
Use following command to program numbers in the allowed number list:
261-Location Index-Number-#*
Where,
Location index is from 01 to 32.
Number can be any telephone number of maximum 16 characters and valid characters are 0 to 9, A, B, C and D.
By default, allowed number list table is blank.
For programming Special Digits, use the codes given in the table given below:
Two digits will be used for programming each alpha-numeric digits. For e.g. to program character A in the
number string, you should program #4. Therefore, while programming telephone number you will be able
to program a number string of maximum 8 digits only if it consists of all alphanumeric characters.
Special Digits Codes
A #4
B #5
C #6
D #7