Matrix SIMADO GFXD1111S, System Manual

Page: 17 / 194

Matrix SIMADO GFXD1111S V3 System Manual 11
CHAPTER 3
Getting Started
Protecting SIMADO GFXD1111S
You should take following measures to protect your SIMADO GFXD1111S.
Installation Precautions:
• Do not turn on the power supply until the installation is complete.
• Do not install the system in direct sunlight and the place where there is excessive cold or humid
atmosphere.
• Do not install the system where sulfuric gases are produced and in areas where there are thermal springs
because it may damage the equipment.
• Do not install the system at the places where shocks or vibrations are frequent or strong.
• Do not install the system at dusty places or places where it may come in direct contact with oil or water.
• The system should be installed at the place where enough open space is there for ventilation.
Safety Instructions:
You should always take basic safety precautions to reduce the risk of fire, electric shock and injury to the system as
well as the person using it. Follow the steps given below:
• Read and understand all the instructions given in the manual.
• Unplug the product from the wall outlet before cleaning and do not use liquid cleaners. Use only dry and
soft cloth.
• Do not use the product near water.
• Do not open the system in power ON condition.
• Do not place the product at the place from where it can fall and serious damage may be caused to the
product.
• Interfacing cables should not touch the exposed power line cable.
• The product should be operated with proper power voltage supply.
• Do not place the product where power cord can be misused.
• Reduce the risk of electric shock or damage to the system by taking the product to a qualified serviceman
for repair work or servicing. Removing covers or opening the system or incorrect reassembly may cause
electric shock when used subsequently.