Matrix SIMADO GFXD1111S, System Manual

Page: 165 / 194

Matrix SIMADO GFXD1111S V3 System Manual 159
Range of Inter Digit Pause Time is from 20ms to 200ms in the multiple of 10ms. By default, it is 100ms i.e.
Code=09.
DTMF Out Dial Level:
DTMF out dial level determines the magnitude with which the DTMF digits would be dialed out by the system.
Use following command for programming DTMF out dial level for Mobile/FXO port:
243-Code-#*
Where,
Range of DTMF out dial level is from 0 to -10.5 dB. By default, it is 0dB i.e. Code=1.
Call Proceeding Tone:
Call Proceeding Tones are the signaling tones generated by the system or network to inform the user of the call
establishment in the network. When the user dials a number from the telephone instrument connected to
GFXD1111S, it gets routed either through FXO Port or Mobile Port as per the programming done.
Sometimes while processing a call either through Mobile or PSTN network, silence is generated by the network.
Due to this silence, user might think that the call is disconnected and might hang up. To avoid this silence received
from the network while processing a call, Call Proceeding Tone feature is used.
SIMADO GFXD1111S support following two Call Proceeding Tones: Network tone and Silence.
• Network Tone: Network Tone is the tone generated by the network when a number is dialed out by the
system. The speech path is connected after OK response is received from the network.
• Silence: Silence means no tone is played to the user till all the numbers are dialed out by the system.
Speech path is connected after all numbers are out dialed by the system.
07 80
08 90
09 100
10 110
11 120
12 130
13 140
14 150
15 160
16 170
17 180
18 190
19 200
Code DTMF Level (dB)
1 0
2 -1.5
3 -3.0
4 -4.5
5 -6.0
6 -7.5
7 -9.0
8 -10.5
Code Inter Digit Pause Time (ms)