manualshive.com logo in svg

Matrix SIMADO GFXD1111S, System Manual

Share
Download
Matrix SIMADO GFXD1111S System Manual Download Page 138

132

Matrix SIMADO GFXD1111S V3 System Manual

Programming the System through Mobile Port

SIMADO GFXD1111S allows programming the system from any remote location using data services of the GSM/
CDMA network. The remote user can program the system using the same commands that are issued from a 
normal station to program the system.

To Program system through Mobile Port:

•

Prepare a text file (*.txt) containing programming commands in notepad.

•

Get data services enabled for the SIM Card used in the SIMADO GFXD1111S to be programmed from the 
Service Provider.

•

Ensure that the SIMADO GFXD1111S to be programmed is in ' SMS mode' (Mode 1).

•

Setup the modem (in the computer from where programming is to be done).

Setup the Modem

1.

Click on Start 

 Control Panel.

Summary of Contents for SIMADO GFXD1111S



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands