Matrix SIMADO GFXD1111S, System Manual

Page: 128 / 194

122 Matrix SIMADO GFXD1111S V3 System Manual
By default, the notification of incoming SMS is disabled.
Enable/Disable Location Information Indication:
SE should enable Location information indication feature to display the location of SIMADO GFXD1111S on the
LCD of conventional phone. This feature is service provider dependent and must be enabled by the service
provider to use it.
Use following command to enable/disable location information indication on the Mobile Port:
205-Flag-#*
Where,
By default, the Location Information Indication is OFF.
Receive Gain:
GFXD1111S enables SE to adjust receive gain of the Mobile Port to increase the audibility of incoming speech.
Use following command to program the receive gain of the Mobile Port:
271-Receive Gain-#*
Where,
Receive Gain range is from 1 to 5, where 1 is minimum and 5 is maximum gain.
By default, Receive Gain is 3.
Use following command to default the receive gain at mobile port:
271-0-#*
Transmit Gain:
GFXD1111S enables SE to adjust the transmit gain of the mobile port to adjust the right intensity for the transmitted
signal.
Use following command to program the transmit gain of the Mobile Port:
272-Transmit Gain-#*
Where,
Transmit Gain range is from 1 to 5, where 1 is minimum and 5 is maximum gain.
Flag Meaning
0 OFF
1 ON
Receive Gain Meaning
1 Very Low
2 Low
3 Normal
4 High
5 Very High
Transmit Gain Meaning
1 Very Low
2 Low
3 Normal
4 High
5 Very High