manualshive.com logo in svg

Matrix SETU VFXTH, System Manual, Page: 141 / 322

Share
Download
Matrix SETU VFXTH System Manual Download Page 141

Matrix SETU VFXTH System Manual

136

The 

IP Address List for Server Access

 opens in a new window. You can store 10 entries in this table.

•

Enter the IP Addresses and their respective Subnet Mask in the table.

•

Click Submit and close the window.

SETU VFXTH will allow system access only to those users whose IP Address matches with the one 
configured in the IP Address List for Server Access.

•

Block ICMP on WAN:

 Enable this check box, if you want the system to discard the ICMP packets 

received on WAN (Ethernet). Default: Disabled.

•

Block PING on WAN:

 Enable this check box, if you want the system to discard the PING request 

received on WAN (Ethernet). Default: Disabled.

Blocking of PING on WAN will prevent your network from being pinged or detected by other Internet 
users and acquire your IP Address.

Block PING on WAN

 will not be applicable, if you have enabled 

Block ICMP on WAN

.

Certificate

•

Click 

Certificate

 to expand and select the certificate for each of the following.

Summary of Contents for SETU VFXTH



































































































































































































































































































































Reviews:

No comments