manualshive.com logo in svg

Matrix SETU VFXTH, System Manual, Page: 115 / 322

Share
Download
Matrix SETU VFXTH System Manual Download Page 115

Matrix SETU VFXTH System Manual

110

•

Click 

Submit

 to save the entries and close the window. 

•

To configure the 

Denied Number List

,

 

click 

Settings

.

•

The Number List page opens in a new window.

•

By default, Number List 8 is assigned as Denied Number LIst. 

•

Enter the numbers you want the system to restrict from being dialed out in this list. 

•

Click 

Submit

 to save the entries and close the window. 

You may configure a different Number List as Allowed and Denied List. See 

“Allowed - Denied Logic”

 under 

“Number Lists”

.

Black Listed Callers

With the Black Listed Callers feature you can block incoming calls from specific addresses/numbers on SIP Trunks. 
Thus all incoming calls from the numbers you have 'blacklisted' will be automatically rejected by SETU VFXTH.

To apply Black Listed Callers on SIP Trunk, 

•

Select the 

Reject Calls from Blacklisted Callers 

check box.

•

Configure the 

Black Listed Callers

 table. To do this, 

•

Click 

Settings

. 

Summary of Contents for SETU VFXTH



































































































































































































































































































































Reviews:

No comments