Matrix SETU VFX44L, System Manual

Page: 80 / 195

Matrix
80 SETU VFX88L
/
VFX44L V1
System Manual
Call Waiting
What’s this?
• When the user is busy with one active call and there is another call
for the same user, another call is considered as Call Waiting.
• User can Set/Cancel Call Waiting feature only if Call Waiting
feature is enabled in Class of Service and Supplementary services.
• Feature can be set/cancel by the Access code as given below (by
default):
• Set Call Waiting
*71
• Cancel Call Waiting
*72
• Access code for Accept Call Waiting call and release call waiting
call are as given below:
• Release Call Waiting
Flash-3
• Accept Call Waiting
Flash-4
How to use it?
• You will get indication of a new Incoming call when user will get the
Call Waiting Beeps (Intrusion tone) during speech condition. To
attend the waiting call proceed as described below:
Option 1:
• Go ON-Hook.
• Active call will be disconnected.
• You will get Ring on the telephone.
• Go OFF-Hook, during ring.
• You will be connected to the waiting call.
Option 2:
• You can dial
Flash-4.
• Now you will be directly connected to the Waiting call and current
call will be released.
• When user hears the Call Waiting Beeps(Intrusion tone) during
speech condition and if user wants to stop Call Waiting beeps i.e
do not want to accept the Waiting call,
• User has to dial
Flash-3
.
• Now user will remain connected to the current call and Call
Waiting beeps will be stopped.