Matrix SETU VFX44L, System Manual

Page: 57 / 195

Matrix
57 SETU VFX88L
/
VFX44L V1
System Manual
Call Forward
What’s this?
• The gateway supports few supplementary features like ‘Call
Forward (CF), Call Hold etc.
• You can use following types of call-forwarding:
•
Forward-Unconditionally:
Used when desired destination
number is dialed without knowing the status of destination-busy or
not replying
•
Forward-Busy:
Used when desired destination number is dialed
which is Busy with some other call.
•
Forward-No Reply:
Used when desired destination number is
dialed which is not attending the incoming call and user is getting
Ring Back Tone for specified time. For this user will be required to
program “No-Reply Timer”.
• You can forward calls to different destination numbers in different
cases. For e.g. you will be able to forward calls to destination
number 1 when busy and to destination number 2 when No Reply.
• Using programmed Access Code, you can Set/cancel Call Forward
-Unconditional, Call Forward-Busy and Call Forward-No Reply.
How to use it?
• First enable the feature for a specific FXS port in Class of
Service.
• Go OFF-Hook.
• You will get ‘Feature Tone’ instead of ‘dial tone’.
• Then dial following code to Set/Cancel Call Forward feature:
•
*51
-To Set Call Forward-Unconditional
•
*52
-To Cancel Call Forward-Unconditional
•
*53
-To Set Call Forward-Busy
•
*54
-To Cancel Call Forward-Busy
•
*55
-To Set Call Forward-No Reply
•
*56
-To Cancel Call Forward-No Reply
How it works?
• Access code for Set/Cancel Call Forward of any type is
programmable.
• When call has to be routed on any FXS port, Call Forward Status