Omni-Flow 380
5.12.3 Stitch folder setting
1
）
Set the paper deflector
As shown in the following picture, there is a rubber head screw to fix the paper
deflector.
2
）
Connection select
As shown in the pictures, if the stitch folder was connected to the 33TN and Aeolus
38, it will come up the warning message for the confirmation of connecting to 33TN
and Aeolus38.
3
）
Adjust the stitch position
After finish the connection, we can press the test button on the stitch folder and feed
one book manually to the stitch folder. Then adjust the big wheel on the stitch folder
to make sure it will stitch on the middle length of the book. After that press the test
button one more time to finish the job.
Paper deflector
Rubber head screw.
24
