Matrix NAVAN CNX200 System Manual Download | Manualshive

Page: 941 / 1388

background image

Matrix NAVAN CNX200 System Manual

931

Call Hold

Call Hold enables you to put an on-going conversation (with an internal or external number) on hold. NAVAN offers
three types of Call Holds,

•

Exclusive Hold:

An on-going conversation is put on hold from an Extended IP Phone and is retrieved from

the same Extended IP Phone that put it on hold.

•

Global Hold:

An on-going conversation is put on hold from an Extended IP Phone and is retrieved from

any Extended IP Phone connected to NAVAN.

•

Consultation Hold:

An on-going conversation is put on hold in order to perform any further activity, such

as Call Transfer, Conference, Call Toggle.

Exclusive Hold and Global Hold are supported on Extended IP Phones.

Consultation Hold is supported on the SLTs and Extended IP Phones.

NAVAN supports interoperability with the Polycom IP Phones. When any extension of NAVAN puts a SIP
Extension on hold (Exclusive, Global or Consultation Hold), NAVAN will send Re-Invite message to the SIP
Extension put on hold.

How it works

Exclusive Hold

When a call is put on Exclusive Hold,

•

NAVAN starts the

Exclusive Hold Retrieval Timer

(programmable; default: 2 minutes). The call remains

connected to the Extended IP phone which placed it on hold.

•

The call remains on hold for the duration of this timer.

•

The extension user can retrieve the call within this timer.

•

If the call is not retrieved before the expiry of this timer, it is returned to the Extended IP Phone. The
Extended IP Phone rings and may answer the call.

•

The returned call is disconnected, if the Extended IP Phone is not in idle state, or if the call is not answered
by Extended IP Phone.

A call placed on Exclusive Hold can be retrieved in the following ways:

•

Pressing the Hold key again (when the Extended IP Phone is idle).

•

Pressing the Call Appearance key of the call put on hold (when the Extended IP Phone is busy).

•

Pressing DSS key assigned to the trunk/extension you put on hold.

•

Answering the call, when it returns at the end of the Exclusive Hold Retrieval Timer.

«
...
939
940
941
942
943
...
»

Summary of Contents for NAVAN CNX200













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NAVAN CNX200

Brand: Quantum Pages: 8

Brand: Quantum Pages: 21

Brand: Quantum Networks Pages: 27

Brand: Chantry networks Pages: 4

Brand: jbmedia Pages: 6

AceroDURO 100/S100

Brand: CNC-Step Pages: 86

Brand: Link-One Pages: 77

AisStation WHR-G54S

Brand: Buffalo Pages: 82

Brand: OBERON Pages: 3

Brand: Bountiful Pages: 1

Brand: Arista Pages: 4

WLTMS-110_384041

Brand: Gemtek Systems Pages: 14

Brand: Zte Pages: 51

Brand: Symbol Pages: 100

Brand: PHICOMM Pages: 53

Brand: ViewSonic Pages: 53

AW58800HTP-PAIR

Brand: AvaLAN Pages: 13

Brand: AvaLAN Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands