Matrix NAVAN CNX200, System Manual

Page: 474 / 1388

464 Matrix NAVAN CNX200 System Manual
CO Trunks
This NAVAN variant supports up to 2 CO Trunks.
To configure,
1.
Log into Jeeves as System Engineer.
2.
Click the Trunks tab.
3.
On the left navigation bar, click the CO Trunks link.
Following icons will appear in this page,
More: Click this button to view all parameter links on the page.
Less: Click this button to view only the essential parameter links on the page.
Expand: Click to expand a link to display all parameters under the link.
Collapse: Click to collapse a link. Hides all parameters under the link.
Copy : Click to copy the parameters under a specific link of a page to the same link under another trunk
page.
Settings : Click to configure the settings of a parameter further.
More link: Click to view all additional parameters on the page.
To configure another CO trunk, click the CO number (name) tab.
To save settings, click Submit .
To assign default values to all the parameters of the trunk, click the Default button.
To copy the same CO parameter values to the other CO trunks, use the Copy button.
If you assigned names to the CO trunks on the “Trunks” page, the same names will appear on the tabs.
To change the name of the CO trunk, you must go back to the “Trunks” page.