Matrix NAVAN CNX200, System Manual

Page: 467 / 1388

Matrix NAVAN CNX200 System Manual 457
You can choose whether the system should display the CLI of the ‘Held Party’ or the CLI of the ‘Transferring Party’
to the transfer destination extension while the call is being transferred.
Select the radio button of the desired option. See “Calling Line Identification and Presentation (CLIP)” to know
more.
Class of Service
If you set the SIP Trunk mode as Peer-to-Peer and select Treat Incoming Peer-to-Peer Call as Station , configure
class of service.
1.
Click Class of Service to expand options.
Define the Class of Service for Day time and Night/Break time.
2.
To allow a feature, select the check box of the feature.
3.
To deny a feature, clear the check box.
Toll Control
If you set the SIP Trunk mode as Peer-to-Peer and selected Treat Incoming Peer-to-Peer Call as Station ,
configure Toll Control.
1.
Click Toll Control to expand options. Set the desired Toll Control for the Day and Night/Break.
2.
Select the type of Calls Allowed during Day : All Calls, No Calls, Local Calls, Regional Calls, National
Calls, International Calls, and Limited Calls 1, 2, 3. Default: All Calls.
3.
Select the type of Calls Allowed during Night/Break : All Calls, No Calls, Local Calls, Regional Calls,
National Calls, International Calls, and Limited Calls 1, 2, 3. Default: All Calls.