Matrix NAVAN CNX200, System Manual

Page: 373 / 1388

Matrix NAVAN CNX200 System Manual 363
• Select dB level for Bypass Gain , from -31 to 31. Default: -9 dB.
Pass Through Fax packets are transported using RTP protocol. Normally, fax calls require less gain
compared to voice calls. However, to improve fax reception, NAVAN allows you to configure gain settings
for fax (Data Gain and Bypass Gain).
NAVAN supports Fax Receive Gain for SIP to Digital Trunk calls as well as SIP to SLT Calls.
24.
Configure Pass Through FAX Rx Gain (SIP-SLT Call) , if you want to improve quality of Pass Through
Fax received on a fax machine connected to an SLT port. This parameter has relevance only when you
select ‘Pass Through’ as Fax Type.
• Select dB level for Data Gain , from -31 to 31. Default: -11 dB.
• Select dB level for Bypass Gain , from -31 to 31. Default: -9 dB.
25.
Click Submit to save VoIP settings.
Voice Mail Auto Attendant
1.
Click Voice Mail Auto Attendant to expand options.
2.
Select a Profile from 1 to 4 as Voice Mail Auto Attendant Profile for the extension. Default: 1.
The profile determines the welcome message to be played to mailbox owner (extension user) when they
reach the home node. It also determines whether or not the user should be taken to the root node directly.
Make sure you also configure the Voice Mail Auto Attendant Profiles when you assign them to extensions.
To configure, click the link
Voice Mail Auto Attendant Profile. See “Voice Mail Auto Attendant Profile” .
3.
To allow callers to reach the SIP extension using Dial By Name option offered by the VMS Auto Attendant,
abbreviate the SIP extension user’s name to three letters and type it in the
Abbreviated Name field.
When the VMS Auto Attendant is used, callers can be prompted to Dial by Name of the desired party
(extension user) instead the extension number.
4.
Select the Call Transfer Type for the Day and Call Transfer Type for Night/Break from the following
options:
• Transfer when Extension answers: When the caller dials the extension number, the VMS Auto
Attendant will transfer the call when the extension answers (goes OFF-Hook).
If the extension does not answer
51
, the VMS Auto Attendant will transfer the call to the mailbox of the
extension, if assigned, or take the caller back to the home node.