94
CONTENTS
Figure 52: wxPropView - Setting TriggerDelay
9.1.3
Command-line options
It is possible to start wxPropView via command line and controlling the starting behavior using parameters. The
supported parameter are as follows:
Parameter
Description
width
or
w
Defines the startup width of wxPropView. Example:
width=640
height
or
h
Defines the startup height of wxPropView. Example:
height=460
xpos
or
x
Defines the startup x position of wxPropView.
ypos
or
y
Defines the startup x position of wxPropView.
splitterRatio
Defines the startup ratio of the position of the property grids splitter. Values be-
tween
>
0 and
<
1 are valid. Example: splitterRatio=0.5
propgridwidth
or
pgw
Defines the startup width of the property grid.
debuginfo
or
di
Will display debug information in the property grid.
dic
Will display invisible (currently shadowed) components in the property grid.
displayCountX
or
dcx
Defines the number of images displayed in horizontal direction.
displayCountY
or
dcy
Defines the number of images displayed in vertical direction.
fulltree
or
ft
Will display the complete property tree (including the data not meant to be
accessed by the user) in the property grid. Example (Tree will be shown)
←
-
:
fulltree=1
device
or
d
Will directly open a device with a particular serial number.
∗
will take the first
device. Example:
d=GX000735
MATRIX VISION GmbH
