manualshive.com logo in svg

Matrix Vision mvBlueLYNX-X, Technical Manual, Page: 135 / 236

Share
Download
Matrix Vision mvBlueLYNX-X Technical Manual Download Page 135

16  mvBlueLYNX-X - LiveDVD and Virtual Machine

16.1  Introduction

Since the mvBlueLYNX-X has an Embedded Linux as its operating system, you will need to install a suitable
development environment based on Linux with all the software needed, like mvIMPACT Acquire, in order to
develop software applications. To simplify this procedure MATRIX VISION has created a LiveDVD based
on Ubuntu Linux operating system with all the necessary software pre-installed to start developing
immediately.

The LiveDVD can be used as the core of a Virtual Machine. In combination with a Virtual Machine it runs on
all host systems like

Windows®,

• 

Linux®,

• 

Apple Macintosh® or

• 

Solaris®.

• 

This chapter will explain,

How to setup a Virtual Machine image using VirtualBox together with the LiveDVD and

• 

How to work with the Virtual Machine.

• 

16.1.1  Requirements

To be able to setup and use the LiveDVD you will need at least:

Host PC running Windows®, Linux®, Apple Macintosh® or Solaris® operating system.

• 

MATRIX VISION has only tested Windows® and Linux® PCs as a VirtualBox host.

Alternatively: a real PC to be used as a dual-boot system

• 

In both cases...

2 GB RAM

♦ 

8 GB free hard disk memory

♦ 

A DVD drive

♦ 

• 

mvBlueLYNX-X LiveDVD

• 

VirtualBox platform. We recommend the version 4.1.6 or later (download via
https://www.virtualbox.org/wiki/Downloads).

• 

Other Virtual Machine platforms (like VMWare) may also be used but have not been tested and are not
described here.

16.1.2  LiveDVD Image Description

The base system of our LiveDVD is the Ubuntu distribution "10.04".

16.1.2.1  Login data

Username: matrix

• 

Password: matrix

• 

MATRIX VISION GmbH

22 April 2016 Version - 1.49

125

Summary of Contents for mvBlueLYNX-X













































































































































































































































Reviews:

No comments