manualshive.com logo in svg

Matrix Vision mvBlueLYNX-X, Technical Manual, Page: 121 / 236

Share
Download
Matrix Vision mvBlueLYNX-X Technical Manual Download Page 121

Figure 69: wxPropView - White balance summary

13.4.1.2.2.1  White balance with pixel format YUV422Packed?

With pixel format YUV422Packed the debayering is hardware based. For this reason a host-based white
balancing as described above is not possible. In this case you have to adjust the settings of mv OMAP
Preview Config

:

Figure 70: wxPropView - White balance with pixel format YUV422Packed?

13.4.1.2.3  Configuring different trigger modes

To configure a device for a triggered acquisition in wxPropView the property Setting -> Base -> Camera ->
GenICam -> Acquisition Control -> Trigger Selector.

The supported trigger modes of each sensor are described in the sensor data chapter.

All trigger modes are defined by an enumeration:

mvBlueLYNX-X Technical Manual

MATRIX VISION GmbH

22 April 2016 Version - 1.49

111

Summary of Contents for mvBlueLYNX-X













































































































































































































































Reviews:

No comments