Matrix Vision mvBlueFOX, Technical Manual, Page: 20 / 255

5 Important information 13
5 Important information
We cannot and do not take any responsibility for the damage caused to you or to any other equipment
connected to the mvBlueFOX. Similarly, warranty will be void, if a damage is caused by not following
the manual.
Handle the mvBlueFOX with care. Do not misuse the mvBlueFOX. Avoid shaking, striking, etc. The
mvBlueFOX could be damaged by faulty handling or shortage.
Use a soft cloth lightly moistened with a mild detergent solution when cleaning the camera.
Never face the camera towards the sun. Whether the camera is in use or not, never aim at the sun or
other extremely bright objects. Otherwise, blooming or smear may be caused.
Please keep the camera closed or mount a lens on it to avoid the CCD or the CMOS from getting
dusty.
Clean the CCD/CMOS faceplate with care. Do not clean the CCD or the CMOS with strong or abrasive
detergents. Use lens tissue or a cotton tipped applicator and ethanol.
Never connect two USB cables to the mvBlueFOX even if one is only connected to a PC.
The mvBlueFOX is bus powered
<
2.5 W.
The mvBlueFOX meets IP40 standards.
Using the single-board or board-level versions:
• Handle with care and avoid damage of electrical components by electrostatic discharge (ESD):
– Discharge body static (contact a grounded surface and maintain contact).
–
Avoid all plastic, vinyl, and styrofoam (except antistatic versions) around printed circuit
boards.
– Do not touch components on the printed circuit board with your hands or with conductive
devices.
MATRIX VISION GmbH