Matrix Vision mvBlueFOX, Technical Manual, Page: 144 / 255

17.3 Registering and renaming devices for DirectShow usage 137
Figure 5: mvDeviceConfigure - enter new name
4. Afterwards the column "DirectShow friendly name" will display the newly assigned friendly name.
Figure 6: mvDeviceConfigure - renamed device
Note
Please do not select the same friendly name for two different devices. In theory this is possible, however the
mvDeviceConfigure GUI will not allow this to avoid confusion.
17.3.3 Make silent registration
To make a silent registration without dialogs, the Windows tool
"regsvr32"
via command line can be used.
The following command line options are available an can be passed during the silent registration:
EXAMPLES:
Register ALL devices that are recognized by mvIMPACT Acquire (this will only register devices which have drivers
installed).
regsvr32 <path>
\
DirectShow_acquire.ax /s
MATRIX VISION GmbH