Matrix Telecom Proton 206, System Manual

Page: 52 / 98

52 PROTON 206/308 V1 System Manual
Important Points:
• Flexible numbers are the codes dialed from dial phase to call another station. These flexible numbers should
be unique and should not match with any other station or any of the features available from the dial phase.
• It is possible to have single digit, 2-digit, 3-digit and 4-digit flexible numbers.
• It is also possible that few stations have single digit, few have 2-digit, few have 3-digit and remaining have
four digit flexible numbers.
• Flexible number having common digits can’t be assigned to another station. For example if 3101 is used then
310 can’t be used/programmed. Same way if 3111 is used then 311 can’t be used/programmed.
• Same flexible number cannot be assigned to two different stations. For example, if you have used 211 for
one station then 211 can’t be assigned to any other station if both the stations are in the same tenant group.
• It is possible to clear the flexible number of all the stations.
• When the flexible number of a station is cleared, one cannot call that station. However the station with null
flexible number can make calls as usual.
• Use flexible numbers for all the features used from User mode. Software port numbers are to be used only
during for SE mode or SA mode.
• If any flexible number starts with a digit used for feature code then the feature can be used after preferring it
with ‘*’. For e.g. if a station is assigned flexible number ‘44’ then code for Raid becomes ‘*4’.
Hold
What’s this?
This feature allows the user to put the present party on hold.
How to use it?
How to program?
Hold is a programmable feature. Please refer “Class Of Service (COS)” for more details.
Relevant Topics:
1. “Class Of Service (COS)” 36
2. “Flash Timer” 50
Hotline
What’s this?
The PROTON 206/308 offers three types of hotline viz. Hotline-Trunk, Hotline-External Number and Hotline-
Internal.
Hotline-Trunk
• You get connected to a trunk, the moment you lift the handset.
• This feature is useful when you are making more number of trunk calls compared to internal calls. Once this
feature is enabled, as soon as you lift the handset you get the trunk dial tone after the set time.
• This feature is also called Hot Outward Dialing (HOD).
• If ‘0’ or ‘5’ is used as trunk, then any of the free trunks from group 0 or 5 will be given to the station user the
moment he picks up the handset.
To set Hotline-Trunk
1 Speech with one station/external caller.
2 Dial Flash. Station goes on hold and gets music. You get dial tone.
1 Lift the handset. Dial tone
2 Dial 151-Trunk. Confirmation tone