Matrix Telecom Proton 206, System Manual, Page: 51 / 98

PROTON 206/308 V1 System Manual 51
Flexible Numbers
What’s this?
The PROTON 206/308 offers flexibility to assign a code of your choice to access a station. This code is called
flexible number. For example, to access first station one has to dial 21. It is possible to change this code to any
other number of your choice.
The system loads default flexible numbers to all the stations on first power ON. Later the stations can be
assigned desired flexible numbers.
Following table shows the flexible numbers assigned to the port is default state.
How to program?
Use following command to program the flexible number for a station:
37-Port Number-Flexible Number-#/Flash
Where,
Port Number is from 01 to 08.
Flexible number can be of 1, 2, 3 or 4 digits.
Terminate the command using
#/Flash , if flexible number is of less than four digits.
Use following command to assign default flexible numbers to all the ports:
37-*-0
Use following command to clear flexible number for a particular station:
37-Port Number-Flash
Where,
Port Number is from 01 to 08.
Use following command to clear flexible numbers for all stations:
37-*-Flash
Example:
Port 01 to 04 should be assigned flexible numbers as 31 to 34 and port from 05 to 08 should be assigned flexible
numbers as 21 to 24.
37-01-31#
37-02-32#
37-03-33#
37-04-34#
37-05-21#
37-06-22#
37-07-23#
37-08-24#
Port Number Flexible Number
1 21
2 22
3 23
4 24
5 25
6 26
7 27
8 28