manualshive.com logo in svg

Matrix Telecom Proton 206, System Manual, Page: 22 / 98

Share
Download
Matrix Telecom Proton 206 System Manual Download Page 22

22

PROTON 206/308 V1 System Manual

CAUTION!

For all normal applications, keep this PBX Expansion count to 0 for all the trunks. Otherwise, outside dialing may 
be hampered. The PROTON 206/308 supports PBX Expansion count for each trunk.

How to program?

Use following command to program PBX Expansion count for a trunk:

54-Trunk-PEC Count

Trunk is from 1 to 3.
PEC Count is from 0 to 9

By default, PEC for all the trunks is 0.

Example:

 

To program PEC=1 for trunk 1, dial 

54-1-1.

Boss Ring

What’s this?

This feature helps the user to identify the caller. A person in the organization having higher hierarchy can be 
assigned this feature. Whenever a person having access to Boss Ring calls any other person in the 
organization, the called station rings differently. This helps the called party to identify the caller.

How to program?

Boss Ring is a programmable feature. It can be allowed or denied to a station user. This feature is associated 
with feature Raid. Whenever a person having access to Raid makes a call the called station gets Boss Ring. 
Please refer 

“Class Of Service (COS)”

 for more details.

Important Point:

•

Boss Ring is same as Alarm Ring.

Relevant Topics:

1.

“Distinctive Rings”     46

2.

“Class Of Service (COS)”     36

Busy Hunting Group

What’s this?

In some applications, it is desirable that if the called station is busy, the call should ring on the near by station 
instead of giving busy tone to the caller. 

How to use it?

Desired stations can be programmed in one group. If the called station is busy then the call will be diverted to 
next free station in the group.

How to program?

Use following command to program a station in a busy hunting group:

304-Station-Busy Hunting Group

Where,
Station is from 21 to 28
Busy Hunting Group is from 1 to 9

Use following command to program all stations in a busy hunting group:

304-*-Busy Hunting Group

Summary of Contents for Proton 206



































































































Reviews:

No comments