MATRIX ORBITAL
13
Phone: 403.229.2737
Touch
The HTT70 can be ordered with a touch panel. When the touch panel is properly configured the touch
cursor will accurately follow your finger as it moves across the screen. If the cursor is not responding to
your touches, or if the cursor is offset from your finger, try the following:
If you are using a resistive touch display, try downloading the HTT Calibration Software,
available on our website here:
https://www.matrixorbital.com/software/htt-calibration
Once downloaded, run the calibration program and follow the instructions that appear on
screen.
If you are using a capacitive touch display, make sure the screen is clear of debris or droplets.
If you are still unable to resolve the issue, please use the Contact section to reach a friendly
Matrix Orbital support representative.
