67
9.21 PUlley Axle SeT rePlACeMeNT - CoNTINUeD
fIgUre e
fIgUre f
fIgUre g
6) Remove the bearing (Figure E).
7) Remove the large nut holding in the pulley axle assembly with a large channel lock pliers or a pipe wrench (Figure F).
8) Once the large nut is removed, the pulley axle set can be removed from the left side of the frame (Figure G).
9) Reverse Steps 1-8 to install a new pulley axle set.
note:
Re-tension the generator belt to 85 lbs.
10) Test the bike for function as outlined in Section 9.23.
CHAPTer 9: PArT rePlACeMeNT gUIDe