Installation
Page 9
5.2
Mount Extension Cat or Extension JD
Attention!
Extension must be secured via bolts
To attach the sweeper, a tractor with coupling triangle or JD lift is required.
Adding the extension using a coupling triangle is done using either extension cat. 0 or
scanfram. When the quick coupling triangle is lifted into the extension, for safety reasons,
the locking bolt must be pushed in and secured by the spring plug. If this is not possible,
the locking part must be re-adjusted. Loosen both nuts of the locking part and move the
lock so that the bolt can be pushed in. Re-tighten the nuts after that.
Figure 3: Locking coupling triangle
The JD extension is added on using the JD lift mounted onto the tractor. The JD
extension can be tilted by moving the nuts on the eye-bolts parallel. The JD extension
must be adjusted so that the sweeper is horizontal when in use. The connection is
secured via two locking bolts.
Figure 4: Locking JD extension
