Delivery and Shipment
Page 7
Attention!
Check all screw connections before and after each operation. Loose
connections must be tightened again.
Damages may occur.
2.5
Basic Rules
Before the machine is started up, check it for operational safety every time!!!
Cleaning work, such as cleaning with a high-pressure device, should be
performed so that the water jet is not pointed directly on bearing and turning
parts (shaft seals, grease nipples and so on). Otherwise check the free
movement of parts and grease, if necessary!
In the case of non-compliance, all guarantee claims lapse.
3
Task and Application
Combined with a tractor, the sweeper can be used to sweep dirt and snow on roads and
pavements. With an appropriate dirt catcher (available as an accessory), the swept-up
dirt can be caught at the same time.
This sweeper is an independently sweeping machine. This means the dirt is swept and
caught by the dirt catcher (accessory), if applicable. Because of this, you should expect a
certain dust development with this machine, unlike with a sweeping and suction machine.
The machine is installed at the front of a tractor and is driven from it through a power
take-off or a hydraulic engine. To sweep large areas, gutters or similar things, the
machine can be swivelled hydraulically in both directions.
All operation functions can be controlled from the driving seat.
Attention!
When sweeping snow, do not use the front sweeper with the available dirt
catcher. This can damage the front sweeper.
The sweeper may only be used for small levels of snow, up to about 5 cm.
Attention!
When using a dirt catcher and / or mechanical or hydraulic side brush
(available as an accessory), the sweeping roller cannot be swivelled. This
can damage the front sweeper.
