Installation
Page 9
There are two attachment points for the upper link.
•
Upper point is for Cat 2
•
Lower point is for Cat 1 and Cat 1N
Fig. 1: Mounting categories
The mount for the tractor’s lower link is width
-adjustable and likewise is equipped with
two attachment points.
4.3
Mechanical drive
The spreader can be driven mechanically by means of a universal joint shaft. The
universal joint shaft requires a connection on the spreader with a diameter of 19 mm and
a feather key. The universal joint shaft connection on the tractor differs depending on the
tractor model. The length of the universal joint shaft must be adapted to the particular
tractor.
Attention!
Damage can occur to the spreader or the tractor.
Only use the provided universal joint shaft.
Comply with the instructions in the operating manual provided by the
manufacturer of the universal joint shaft.
Note!
Mount the universal joint shaft as described in the original manual supplied
by the manufacturer of the universal joint shaft.
Note!
Depending on tractor type the supplied universal joint shaft may be too
long. Execute the steps described below to shorten the universal joint shaft.
4.3.1
Adaptation of the universal joint shaft
1. Pull the two halves of the universal joint shaft apart.
