4
Page 10
Warning pictograms
Warning pictograms point out dangers that cannot be counteracted by means of safety
measures. Strict observance of the pictograms is necessary to prevent severe injuries or
death.
Danger!
Missing warning notices must be replaced immediately.
Do not operate the machine if warning notices are missing.
You can order warning pictograms with the spare parts numbers specified in
chapter 4.6.2.
General warning pictograms
This section explains general warning pictograms that are not specific to a particular ma-
chine.
Read the operating manual and observe the safety information.
Shut down the engine before performing maintenance and repairs
Remove the key.
Injuries from emerging high-pressure fluid.
Comply with the notice in the operating manual.
Machine-specific notice
This section explains machine-specific warning pictograms and notices for operation and
maintenance of the machine.
Caution!
Increased risk of accident due to rotating PTO shaft.
Do not enter the work area of the PTO shaft when it is rotating.
For your safety, do not wear loose clothing. Switch off the implement and wait until all
machine parts have stopped moving before converting or servicing the implement.