6
Page 19
Attachment of the front power system
Mounting of the front power system is described in a separate assembly manual. If the manual is
not available, it can be obtained online from matev GmbH.
Caution!
Connection positions in
Fig. 8 for use of the front power system
This requires hydraulic kit 131 9038
raise
lower
Fig. 7: Raise/lower hydraulic connections
Mounting of front-end hydraulics
Caution!
Injuries due to fluid escaping under high pressure.
Observe the information in the operating manual.
Install the hydraulic lines in such a manner that any risk of damage due to the
wheel or the front axle is excluded. Also check the routing of the lines at full
steering travel of the wheels and oscillation of the front axle in both directions.
B
B
B
B
A
A
A
A
