Matco T7 ECO, Manual, Page: 8 / 31

Basics Manual
7
4 Installation
Attention:
Only allow qualified personnel to perform the following tasks. Observe all
the safety instructions in this manual and all other relevant documentation.
4.1 Unpacking
Unpack the installation carefully and check for any transport damage. Retain the pallet, fixings and
wrapping material for possible future transport or dispose of it in accordance with the appropriate
waste handling regulations.
4.2
Transport
•
For weight specifications check t he “Machine specific manual”. Only use suitable lifting gear.
•
Protect the installation from damage, damp and dust, using suitable packing materials.
•
Avoid bumps and shocks.
4.3
Storage
Do not store the installation outdoors! Protect it against dust and fluctuating temperatures
(condensation formation).
4.4 Waste disposal
When the installation reaches the end of its working life or there is no further use for it, the
equipment should be handled according to the currently valid waste disposal regulations.
4.5 Installing
Only install the installation in a location that conforms to the stated safety classification. Install the
installation in a well-ventilated space. Do not put it in an area with any risk of explosion!
Protect the installation against vibration. Remove transport protection materials (when present).
Make sure there is enough free room, especially above the installation. Check the "Machine specific
manual" for dimensions.