Matco A900 CC, Manual

Page: 19 / 56

Manual Matco A900 CC
4
3 Operation
3.1
Inserting film roll
1 - Place a film roll (direction of unwinding depends on the side of the cling).
2 - Apply film according to the illustration below
F = Film roll
G = Guided roll
B = Brake roll
P = Pallet
M = Mast
CI = CLING INSIDE (adhesive side inside)
In this way, the film must be inserted into the braking system when a differential cling film is used,
the adhesive side being on the inside of the film when it is unwound from the film roll.
CO = CLING OUTSIDE (adhesive side outside)
In this way, the film must be inserted into the braking system when a differential cling film is used,
the adhesive side being on the outside of the foil when it is unwound from the film roll.
When using a “double sided cling” fil m, in principle, it does not matter how the film is inserted.
Film
Film diameter Max. 320 mm
Sleeve diameter 76.4 mm (3 inch)
Film width Max. 600 mm
Thickness 17 - 35 μm