background image

MT2815R 1  11/30/17

Some dust created by power sanding, sawing, grinding, drilling, and other 

construction activities contains chemicals known to cause cancer, birth defects or 

other reproductive harm. Some examples of these chemicals are:
  •  lead from lead-based paints,
  •  crystalline silica from bricks and cement and other masonry products, and
  •  arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type 

of work. To reduce your exposure to these chemicals: work in a well ventilated 

area, and work with approved safety equipment, such as those dust masks that are 

specially designed to filter out microscopic particles.

 MT2815R
Max. Torque  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 ft. lbs.
Max. Free Speed  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 RPM
Air Inlet  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/4" NPT
Avg. Air Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 CFM 
Sound Pressure Level  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 dBA
Recommended Air Pressure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 psig
Air Hose Size  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8" ID
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7-5/8"

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 LBS.
Throttle Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

S P E C I F I C A T I O N S

• Operating Instructions 
• Warning Information 
• Parts Breakdown

Copyright © Professional Tool Products, 2017

All rights reserved.

WARNING

WARNING

ALWAYS READ INSTRUCTIONS  

BEFORE USING POWER TOOLS

ALWAYS WEAR  

SAFETY GOGGLES 

USER AND BYSTANDERS

ALWAYS WEAR HEARING  

PROTECTION USER AND  

BYSTANDERS

AVOID PROLONGED  

EXPOSURE TO VIBRATION

CLIQUET PNEUMATIQUE 1/4 PO TRÈS RÉSISTANT

TRINQUETE NEUMÁTICO PARA SERVICIO PESADO 1/4

"

 

SEALED HEAD ROTATING 

THROTTLE RATCHET

1

"

4

MT2815R

Summary of Contents for MT2815R













Reviews: