DESCRIPTION
Multi-Purpose Stool is ideal for work surfaces from 29-37
″
. Seat is
14
″
diameter x 3
1
⁄
2
″
thick, upholstered vinyl fabric over foam. Seat
provides comfort, strength and easy maintenance. Seat control
with pneumatic lift will adjust the seat height from 20
1
⁄
2
- 28
″
and
has a 360° rotation. Base is a 24
″
diameter molded nylon piece
with 2
″
non-marking casters.
ASSEMBLY INSTRUCTIONS
Read these instructions before starting; follow assembly
procedures carefully.
1. Install casters (Key No. 1) into each of the legs of the base
(Key No. 2). Be sure each caster is completely inserted into
leg for proper stability.
2. Insert the lift assembly (Key No. 3) into base with tapered-end
down. Secure lift assembly by applying a little downward
pressure. Remove yellow plastic cap from top of lift assembly.
DO NOT PUSH ON BUTTON AT THE TOP!
3. Install seat with control assembly (Key Nos. 6 and 7) by align-
ing hole on the underside with the shaft of lift assembly. Push
down firmly on seat.
4. When sitting on seat, pull up on seat handle to lower seat. To
raise seat, remove weight from seat and pull up on seat handle.
GENERAL SAFETY INSTRUCTIONS
1. Do not stand on seat.
2. Stool must be on level surface to ensure proper stability.
3. Only use stool when fully assembled.
4. Periodically check fasteners and tighten securely if needed.
5. Never use stool if it does not perform according to this manual.
MAINTENANCE
Pneumatic lift in lift assembly is permanently lubricated at factory
and needs no further lubrication.
Never lubricate pneumatic lift.
Do not remove clip from bottom of lift assembly. Contact Matco
Tools immediately if clip is missing or damaged.
INDUSTRIAL SEATING LIMITED WARRANTY
Product is warranted against mechanical or structural failure due
to defective material or workmanship for 1 year. Provided howev-
er, this warranty lasts only so long as you own your product. If
you sell or otherwise transfer the product this warranty terminates
automatically. Products that are damaged or made unserviceable
by accidents, abuse, misuse or are altered in anyway are not
covered by this warranty.
Matco Tools reserves the right to replace or recondition at its
option, any units covered by this warranty. All return shipments
require Material Return Authorization and must be freight prepaid
unless otherwise approved in writing.
If any product covered under this warranty fails to meet the terms
of this warranty or it is in any respect broken, defective or missing
parts, please call us immediately at toll free 1-866-289-8665. Any
attempts to make unauthorized repairs will void this warranty in
every respect.
This warranty gives you specific legal rights. You may have other
rights which vary from state to state, however such implied rights
are limited to a period of one year from the date of your initial
purchase. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitation may not apply to you.
Matco Tools will in no event be liable for incidental or consequen-
tial damages for any amount in excess of the original purchase
price. Some states do not allow exclusion or limitation of such
damages, so the above limitation or exclusion may not apply to
you.
Part No. 10655.00
Sold by Matco Tools, 4403 Allen Road, Stow, OH 44224-1096
January 2017
HOW TO ORDER REPAIR PARTS
When ordering repair parts or reporting problems, always give
the following information:
NAME OF ITEM
MODEL NUMBER
Multi-Purpose Stool
MS396
PART DESCRIPTION
PART NUMBER
_______________________________
_______________
All parts listed may be ordered from Matco Tools
®
Customer
Service at 1-866-289-8665.
Save This Manual For Future Reference
MULTI-PURPOSE STOOL
Model No.
MS396
OWNER’S MANUAL
MS396_oipm_010_10655.00 01/31/17
