60702-SLIM PROFILE COB LED HEADLAMP-ENGLISH
SLIM PROFILE COB
LED HEADLAMP
WARNING:
Cancer and Reproductive Harm.
www.P65Warnings.ca.gov
WARNING
WARNING
DO NOT DISCARD - GIVE TO USER
MHLMA
Study, understand and follow all
instructions provided with this product.
Read these instructions carefully before
installing, operating, servicing, or
repairing this tool. Keep these instructions
in a safe, accessible place.
• Do not dispose of in fire.
• Do not disassemble.
• Charge only with specified charger.
This product is backed by a One Year Limited
Warranty. This warranty covers
manufacturer defects and workmanship. The
warranty excludes misuse or abuse and
normal wear and tear.
Made in China
to Matco Specifications
PATENT PENDING
1905137-08
Page 1
ONE YEAR LIMITED WARRANTY
Caution: To help prevent personal injury
CHARGING INSTRUCTIONS:
1. Remove the rubber cover from battery
box and fully insert micro USB plug
into micro USB jack.
2. Plug the regular USB end into the wall
adapter then into the 110-120VAC outlet
The LED will illuminate RED.
3. LED indicator will turn GREEN when
fully charged.
OPERATION:
1. Depress and release power switch to
turn headlamp on. Pressing again
within 5 seconds will toggle through
each mode. If the headlamp remains in
any mode for longer than 5 seconds,
the next press of the power button will
turn the headlamp off. There are 2 fixed
light levels: High and Medium. The
dimming feature can be used to get to
the lowest light setting for the longest
run time.
2. Depress and hold power switch to
engage dimming mode. The light will
cycle through highest and lowest
settings with double flashes as
indicator of the highest and lowest
NOTE: CHARGE HEADLAMP FOR 8
HOURS BEFORE INITIAL USE.
settings. Release switch at desired
light output.
3. In any mode, quickly depress and
release power switch twice to engage
the motion sensing power switch.
4. When the motion sensing power switch
is active, the power switch will be
illuminated and the headlamp can be
switched off and on by waving your
hand in front of the motion sensor. The
motion sensor is located directly below
the power switch.
5. To turn off the motion sensing power
switch, depress and release the power
switch once.
6. To activate the RED Safety LED, depress
the white button on the battery
housing. Press once for solid RED LED,
press again for blinking RED LED. Press
a third time to turn off.
