Caution: To help prevent personal injury
Made in China
to Matco specifications
DO NOT DISCARD – GIVE TO USER
Page 1
MHG751C
HEAVY DUTY
HEAT GUN
SPECIFICATIONS:
PRODUCT INFORMATION:
• Normal use of this product is likely to expose the user to
dust and/or microscopic particles containing chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm. Always wear
appropriate safety equipment and clothing when using
this product. Study, understand and follow all
instructions provided with this product. Failure to read
and follow all warnings and operating instructions may
result in damages and serious injury or death.
• Always wear ANSI approved goggles when using this
product. (Users and Bystanders).
• Never use this tool for any application other than for
which it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with
accessories not designed for it could result in serious
injury or death.
• Always select the correct accessories of the correct size
and design for the job that you are attempting to
perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
• Do not begin repairs without assurance that vehicle is in
secure position, and will not move during repair.
WARNING
XXXXXXX-XXXX
WARNING
INTENDED USE OF THE TOOL
Study, understand and follow all instructions provided
with this product. Read these instructions carefully
before installing, operating, servicing or repairing this
tool. Keep these instructions in a safe accessible place.
This heat gun was designed to be used for stripping
paint, removing decals and pin striping, soften
adhesives, drying, thawing, forming and welding
plastics, shrinking wire wrap and various other
insulating wraps, loosening fittings and fasteners, etc.
Do not use this tool outside of the designed intent.
Never modify the tool for any other purpose or use.
120 Volts
13 amp
750° - 1,100°F
1600 W
4.85 lbs.
Shutter Open 23 CFM
Voltage:
Amperage:
Temperature:
Wattage:
Weight:
Average Air Volume:
1 YEAR LIMITED WARRANTY
The manufacturer warrants this product to the original user against
defective material or workmanship for a period of 1 year from the
date of purchase. The manufacturer reserves the right to
determine whether the part or parts failed because of defective
material, workmanship or other causes.
Failures caused by accident, alteration or misuse are not covered
by this warranty. The manufacturer, at its discretion, will repair or
replace product covered under this warranty free of charge.
Repairs or replacements of products covered under this warranty
are warranted for the remainder of the original warranty period.
The manufacturer or its authorized service representatives must
perform all warranty repairs. Any repair to the product by unauthor-
ized service representatives voids this warranty. The rights under
this warranty are limited to the original user and may not be
transferred to subsequent owners.
The warranty is in lieu of all other warranties, expressed or implied,
including warranties of merchantability and fitness for a particular
purpose.
Some states do not allow the exclusion or limitations of incidental
or consequential damages, so the above limitations may not apply
to you.
• Industrial.
Heavy duty construction and long lasting
heat element for professional use.
• Adjustable.
Rotating shutter increases temperature
from 750° - 1,100°F.
• Versatile.
Features a cool down setting and adjustable
position base for fixed stationary use and safety.
English
